BLOG · 2026-11-16 · 行业信息Industry News

名录之外的边界:2027 年度全国碳市场把铝冶炼的履约落在铝电解工序Beyond the List: Where the 2027 National Carbon Market Draws the Compliance Boundary for Aluminium Smelting

2026 年 11 月 6 日生态环境部公布全国碳市场 2027 年度重点排放单位名录,共 3746 家,与 2026 年度总体稳定,其中铝冶炼 100 家,纳入门槛为年度温室气体排放达到 2.6 万吨二氧化碳当量。11 月 9 日《中国能源报》进一步说明:多地集中公示名录后按不重复管控规则将相关单位移出地方试点,划转后统一行业核算报告指南,排放边界与外购电处理可能变化,历史基线与基准值须重新测算,配额分配、清缴时点、CCER 使用比例与项目类型限制均按全国规则重设;名录「有进有出」已常态化,原始记录与管理台账至少保存 5 年。把名录与 9 月印发的配额总量和分配方案并排读,能看到一条更关键的边界:铝冶炼配额基于「铝电解工序」计算,覆盖二氧化碳、四氟化碳、六氟化二碳三种温室气体的直接排放,明确不覆盖外购电力、热力导致的间接排放。本文据此分析:绿电的价值落在产品碳足迹与供应链低碳要求,而非配额清缴;真正影响配额盈缺的是阳极净耗与阳极效应控制,而这又与阳极组装质量、槽控数据留痕、计量器具检定等车间级动作相连。文中区分「电耗链」与「排放链」,给出四条可核查的数据条目,并标明名录单位数、纳入门槛、2025 年度平衡值与 2026 年度方案分属不同口径,不可混用。公开资料整理与独立观察,与本公司业务、客户或业绩无关。On 6 November 2026 the Ministry of Ecology and Environment published the 2027 list of key emitting units for the national carbon market: 3,746 units, broadly stable against 2026, including 100 in aluminium smelting, with an inclusion threshold of 26,000 tonnes of CO2 equivalent in annual greenhouse gas emissions. China Energy News reported on 9 November that after several regions published their lists, the affected units were removed from local pilot schemes under a no-double-control rule: a unified sectoral accounting and reporting guideline replaces local guidance and default values, emission boundaries and the treatment of purchased electricity may differ, historical baselines and benchmarks must be recomputed, and quota allocation, surrender timing, CCER offset ratios and eligible project types are all reset under national rules. Movement into and out of the list is now routine, and source records and ledgers must be kept for at least five years. Read alongside the allowance allocation scheme issued in September, a sharper boundary emerges: aluminium quotas are calculated for the aluminium electrolysis process, cover three gases as direct emissions (CO2, CF4, C2F6), and explicitly exclude indirect emissions from purchased electricity and heat. This note argues that the value of green power therefore lands in product carbon footprints and supply-chain low-carbon requirements rather than in quota surrender; what actually moves the quota balance is net anode consumption and anode-effect control, which in turn connect to anode assembly quality, cell-control data archiving and metering calibration. It separates an electricity-consumption chain from an emissions chain, proposes four auditable data items, and flags that list counts, the inclusion threshold, the 2025 benchmark value and the 2026 scheme belong to different scopes and must not be merged. Compiled from public sources; unrelated to our company's business, clients or track record.

本栏目此前三篇行业文章分别看了前三季度运行数据(11 月 7 日)、节能降碳改造攻坚点名的设备清单(11 月 10 日)与四季度进出口结构和成本重分配(11 月 13 日)。这一篇换到制度口径:11 月 6 日公布的 2027 年度全国碳市场重点排放单位名录,与 9 月印发的配额总量和分配方案,合起来把铝冶炼行业的履约边界划在了一个比「企业」更窄的位置——铝电解工序。数字与条款均标注发布方和年度,不同来源、不同年度口径不拼接;本文为公开资料整理与独立观察。

一、名录:数量稳定,但纳管身份是动态的

据央广网 11 月 7 日援引央视新闻客户端的报道,生态环境部近日公布全国碳排放权交易市场 2027 年度重点排放单位名录,共纳入 3746 家,数量与 2026 年度相比总体保持稳定;名录覆盖发电、钢铁、水泥、铝冶炼四个重点行业,将年度温室气体排放量达到 2.6 万吨二氧化碳当量的单位纳入管理,其中发电行业 2500 家、钢铁行业 229 家、水泥行业 917 家、铝冶炼行业 100 家。重点排放单位须依法报送排放报告、参与碳排放权交易并清缴碳配额。四川省生态环境厅 11 月 13 日发布的同名信息进一步写明名录发布于 11 月 6 日,并列出完全一致的四组数字,可作为交叉核验。

「总体稳定」容易被读成静态。11 月 9 日《中国能源报》(人民日报社主管)第 10 版的报道给出另一面:多地集中公示 2027 年度名录后,按照不重复管控规则,这批单位同步移出地方试点清单;纳入全国市场管理后,不再参与地方市场相同行业、相同种类温室气体的管理,避免重复管控。划远不只是交易平台的切换——地方多沿用本地指南与缺省值,全国执行统一行业核算报告指南,同一设施在排放边界、外购电处理上可能存在差异,历史基线与基准值须重新测算;原本在地方口径下盈余的单元,按全国标杆核算可能转为缺口,碳资产策略随之反转。配额分配、清缴时点、CCER 使用比例与项目类型限制,也都需按全国规则重新设定。报道把这一变化概括为「两本账合并为一本」。

同一报道还有两点常被忽略:名录由省级生态环境主管部门每年编制并公布下一年度名单,「有进有出」已成为常态化制度,企业不能再以「一次性履约」思维安排碳管理;年度排放报告所涉数据的原始记录和管理台账应至少保存 5 年,台账留存与数据保真义务不会随单位调出交易名录而自动消失。报道在讨论首次纳入管控的中型制造企业时点出的短板——三级能源计量缺口、设施边界判定不清、对 MRV 全流程不熟——恰好是一份车间级数据工作清单。

二、配额方案:边界落在铝电解工序,且只算直接排放

行业覆盖温室气体配额计算基准2026 年度分配方法
发电二氧化碳发电机组(逐机组加和)碳排放强度基准法
钢铁二氧化碳钢铁企业法人或钢铁联合生产企业碳排放强度系数法
水泥二氧化碳熟料生产线碳排放强度系数法
铝冶炼二氧化碳、四氟化碳、六氟化二碳铝电解工序碳排放强度系数法

依据生态环境部 9 月印发的《全国碳排放权交易市场 2025、2026 年度发电行业以及 2026 年度钢铁、水泥、铝冶炼行业配额总量和分配方案》,中证网 9 月 3 日与黑龙江省工业和信息化厅 9 月 21 日转载的《中国冶金报》解读均写明:四行业均覆盖消耗化石燃料、工业过程和含碳产品隐含排放等产生的直接排放,均不覆盖因消耗电力、热力等导致的间接排放;铝冶炼是四者中唯一覆盖三种温室气体的行业,四氟化碳与六氟化二碳按《企业温室气体排放核算与报告指南 铝冶炼行业》规定的全球变暖潜势折算为二氧化碳当量。水泥、铝冶炼配额分别基于熟料生产线与铝电解工序计算;钢铁、水泥、铝冶炼 2026 年度采用碳排放强度系数法,立足扩围启动初期定位,分配方法较 2025 年度保持不变。方案还提出逐步与产能置换、产量调控政策衔接协同,强化对违规落后产能、自备电厂的碳排放控制要求,并以「单位产品碳排放越低、配额盈余率越高」为政策导向;同时明确可使用 2024 年 1 月 22 日全国温室气体自愿减排交易市场启动后登记的核证自愿减排量抵销 2025、2026 年度配额清缴。

作为对照,9 月 2 日全国碳排放权注册登记结算机构公告的 2025 年度行业平衡值分别为:钢铁 0.95 tCO2e/t 炼铁工序产品产量、水泥 0.80 tCO2e/t 熟料、铝冶炼 1.56 tCO2e/t 铝。该公告依据《2024、2025 年度全国碳排放权交易市场钢铁、水泥、铝冶炼行业配额总量和分配方案》,用于 2025 年度配额分配,与上文 2026 年度方案不是同一年度口径,引用时不能混用。三组数值都是工序级强度基准,而名录以企业或其他经济组织为纳管单位——这一错位本身说明:核算对象不是法人,而是排放发生的那道工序。

三、两条链:为什么绿电不进配额账,而阳极组装会

把「只算直接排放」与「基于铝电解工序」两句合起来,能推出一个对车间很有用的判断:配额盈缺主要挂在阳极消耗与阳极效应上。含碳产品隐含排放对应预焙阳极在电解过程中的消耗,四氟化碳与六氟化二碳来自阳极效应,另有少量燃料燃烧排放;而电解工序耗电对应的间接排放并不在清缴范围内。因此,在产量、工艺与燃料结构不变时,仅调整网电与绿电的采购比例,并不改变应清缴的配额量。

这不等于绿电没有价值,而是价值落在别的账上:产品碳足迹、下游客户对低碳铝的识别、出口合规以及绿电消费比例考核,都要靠可核证的分项电量与凭证台账兑现。公开讨论中反复出现的一类提醒是「同一笔绿色权益不能在范围二报告与产品低碳声明里重复使用」。把绿电当成配额抵扣,或是把电耗下降直接换算成配额盈余,本质上是把两套规则的口径拼在了一起。对存量产线来说,更实际的做法是分项计量与减排项目分别建账:一边服务能效与碳足迹,一边服务配额与核查。

1. 电耗链:不在配额边界内,但决定成本与碳足迹

本栏目 11 月 8 日讨论过铁—碳压降:钢爪清理、磷生铁成分与夹杂、碳碗清洁、涂料与二次浇注质量共同决定界面接触电阻,进而落到吨铝电耗。这部分属于外购电力对应的间接排放,不进入配额清缴,但既是最大的成本项,也是产品碳足迹与出口合规里分量最重的一段。换言之,压降抽测与成分化验的价值不会因为「不计入配额」而下降,只是兑现路径不同。

2. 排放链:在配额边界内,落在阳极与槽况

另一条链是阳极本体:钢爪与炭块连接松动、磷铁环炸裂、炭块裂纹或掉角等组装缺陷,上槽后会表现为电流分布偏斜、局部过热、阳极效应频次与持续时间上升,甚至提前换极;这些直接改变阳极净耗与全氟化碳排放,也就是配额账的分子。本栏目 11 月 11 日讨论的磷生铁清渣与浇注质量、11 月 14 日讨论的导杆组钢梁焊补与在线分拣,本质上都在压这条链的波动。两条链共用同一批工位,却对应两套核算口径,这正是改造验收条件需要写清楚的地方。

四、车间级可核查条目

  • 分项计量与凭证台账:网电、自备电、绿电交易、绿证与余热回收电分开登记,月度信息化存证与年度排放报告口径一致;计量器具按期检定校准,补齐三级能源计量,避免设施边界判定不清。
  • 阳极与效应记录:阳极消耗量、阳极效应系数与频次/持续时间按规范记录;槽控系统里的数据需定期导出、签字、归档。公开讨论中最常见的缺口正是「系统里有数据,核查时翻不出来」。
  • 组装质量留痕:铁—碳压降抽测、磷生铁成分化验、碳碗清洁与烘干、钢爪抛丸与校直、导杆矫直与分拣判定按批次可追溯,使「接触电阻波动」与「阳极异常消耗」能分开归因。
  • 划转后的边界重算:按全国统一行业核算报告指南重新确认设施边界、外购电处理、历史基线与基准值,避免沿用地方缺省值造成台账与核查口径不一致;台账留存按不少于 5 年安排,且不随名录进出中断。

五、口径提示

3746 家是名录单位总数、100 家是铝冶炼纳管单位数,都不是产能或产量;2.6 万吨二氧化碳当量是纳入门槛,不是排放总量;1.56 tCO2e/t 铝是 2025 年度平衡值,不是 2026 年度配额基准。配额方案适用于 2026 年度,名录属于 2027 年度,两者年度不同,不能拼成一张表。各地名录公示、核算细则与清缴要求以省级生态环境主管部门和官方公开信息为准,转载报道可能只保留要点。

本栏目为公开资料整理与独立观察,仅供参考,不构成投资、采购或技术建议;文中政策与数据均不属于北京博寿冶金技术贸易有限公司的业务、客户或业绩。

The three earlier industry notes in this column looked at first-three-quarter operating data (7 November), the equipment named in the late-2026 energy-efficiency retrofit campaign (10 November), and the fourth-quarter trade structure and cost reallocation (13 November). This one changes to an institutional perspective. The 2027 list of key emitting units published on 6 November, read together with the allowance allocation scheme issued in September, places the compliance boundary for aluminium smelting somewhere narrower than the company: the aluminium electrolysis process. Every figure and clause below is labelled with its publisher and the year it applies to; figures from different sources and different years are not merged. This note is a compilation of public information and independent commentary.

1. The list: stable headcount, dynamic status

According to a 7 November report by China National Radio citing CCTV News, the Ministry of Ecology and Environment published the 2027 list of key emitting units for the national carbon emission trading market: 3,746 units in total, broadly stable compared with 2026. The list covers four priority sectors — power generation, steel, cement and aluminium smelting — and brings in units whose annual greenhouse gas emissions reach 26,000 tonnes of CO2 equivalent. The breakdown is 2,500 in power generation, 229 in steel, 917 in cement and 100 in aluminium smelting. Listed units must submit emissions reports, take part in allowance trading and surrender allowances as required by law. A notice published by a provincial ecology and environment department on 13 November states that the list was released on 6 November and gives exactly the same four figures, providing a useful cross-check.

Broadly stable should not be read as static. A page-10 report in China Energy News on 9 November describes the other side: after several regions published their 2027 lists together, the affected units were simultaneously removed from local pilot lists under a no-double-control rule. Once inside the national market they no longer participate in local management of the same sector and the same greenhouse gas categories. The transfer is more than a change of trading platform. Local pilots mostly relied on local guidelines and default values, whereas the national market applies a unified sectoral accounting and reporting guideline; the same facility may be treated differently in terms of emission boundary and purchased-electricity handling, and historical baselines and benchmarks must be recomputed. A unit that was in surplus under local rules can move into deficit when measured against the national benchmark, reversing its carbon-asset strategy. Quota allocation, surrender timing, CCER offset ratios and eligible project types all have to be reset under national rules — the article sums this up as two ledgers becoming one.

Two further points in that report are easy to overlook. Provincial ecology and environment authorities compile and publish the following year's list each year, so movement into and out of the list has become routine and carbon management can no longer be planned as a one-off compliance exercise. Original records and management ledgers underlying annual emissions reports must be retained for at least five years, and the duty to preserve ledgers and data integrity does not lapse when a unit leaves the trading list. The weaknesses the report identifies for medium-sized manufacturers newly brought into control — gaps in three-tier energy metering, unclear facility boundaries and unfamiliarity with the full MRV process — are effectively a workshop-level data checklist.

2. The allocation scheme: the boundary is the electrolysis process, and only direct emissions

SectorGreenhouse gases coveredBasis for quota calculation2026 allocation method
Power generationCO2Generating units, summed unit by unitCarbon-intensity benchmark method
SteelCO2Steel enterprise legal person or integrated steel producerCarbon-intensity coefficient method
CementCO2Clinker production lineCarbon-intensity coefficient method
Aluminium smeltingCO2, CF4, C2F6Aluminium electrolysis processCarbon-intensity coefficient method

Under the allowance allocation scheme for 2025 and 2026 in power generation and 2026 in steel, cement and aluminium smelting, issued by the Ministry of Ecology and Environment in September, both a 3 September report by a securities news service and a 21 September reprint of China Metallurgical News by a provincial industry department state the same two clauses: all four sectors cover direct emissions from fossil fuel combustion, industrial processes and embodied emissions in carbon-containing products, and none covers indirect emissions arising from consumption of purchased electricity or heat. Aluminium smelting is the only one of the four covering three gases; CF4 and C2F6 are converted to CO2 equivalent using the global warming potentials specified in the sectoral accounting and reporting guideline for aluminium smelting. Cement and aluminium quotas are calculated respectively on the basis of the clinker production line and the aluminium electrolysis process. Steel, cement and aluminium smelting use the carbon-intensity coefficient method for 2026, and in this early expansion phase the method is unchanged from 2025. The scheme also calls for progressive alignment with capacity-swap and output-control policies, stronger carbon control over non-compliant backward capacity and captive power plants, and a policy orientation in which lower unit-product carbon emissions yield a higher allowance surplus rate. It further allows certified emission reductions registered after the national voluntary GHG emission reduction trading market opened on 22 January 2024 to be used to offset 2025 and 2026 allowance surrender.

For comparison, the national carbon allowance registry published 2025 sectoral benchmark values on 2 September: 0.95 tCO2e per tonne of ironmaking-process product for steel, 0.80 tCO2e per tonne of clinker for cement, and 1.56 tCO2e per tonne of aluminium for aluminium smelting. That bulletin rests on the 2024 and 2025 allocation scheme and serves 2025 allowance allocation; it is not the same annual scope as the 2026 scheme above and must not be mixed with it. All three values are process-level intensity benchmarks, whereas the list names enterprises or other economic organisations as the regulated entities. That mismatch is itself informative: the object of accounting is not the legal person but the process where the emissions occur.

3. Two chains: why green power stays out of the quota ledger while anode assembly enters it

Combining only direct emissions with based on the aluminium electrolysis process yields a judgement that is genuinely useful on the shop floor: the quota balance hangs mainly on net anode consumption and anode effects. Embodied emissions in carbon-containing products correspond to the consumption of prebaked anodes during electrolysis, CF4 and C2F6 come from anode effects, and a smaller share comes from fuel combustion. The indirect emissions associated with the electricity consumed by the electrolysis process are outside the surrender boundary. So with output, process and fuel mix held constant, changing only the share of grid power versus green power does not change the allowances a unit must surrender.

That does not make green power worthless; it puts its value in a different ledger. Product carbon footprints, how downstream customers identify low-carbon aluminium, export compliance and renewable-energy consumption obligations all depend on verifiable sub-metered electricity and certificate records. One caution repeated in public discussion is that the same environmental attribute cannot be used twice, once in scope-two reporting and again in a low-carbon product claim. Treating green power as a quota deduction, or converting an electricity-saving figure directly into an allowance surplus, effectively splices the scopes of two separate rule sets. For an existing line, the practical response is to keep separate accounts: one serving energy efficiency and carbon-footprint work, the other serving allowance accounting and verification.

3.1 The electricity chain: outside the quota boundary, decisive for cost and footprint

This column discussed the iron-to-carbon voltage drop on 8 November: claw cleaning, cast-iron composition and inclusions, carbon-bowl cleanliness, coating quality and two-stage pouring together determine interfacial contact resistance and therefore specific electricity consumption per tonne of aluminium. That portion is an indirect emission from purchased electricity, outside quota surrender, yet it remains both the largest cost item and the heaviest component of a product carbon footprint and of export compliance. In other words, voltage-drop sampling and composition analysis do not lose value because they are not counted in quotas; they are simply monetised through a different path.

3.2 The emissions chain: inside the quota boundary, resting on the anode and cell condition

The other chain is the anode itself. Assembly defects such as a loose claw-to-block joint, a cracked cast-iron ring, or a cracked or chipped carbon block show up after the anode is set as skewed current distribution, local overheating, more frequent and longer anode effects, and in some cases an early anode change. These directly alter net anode consumption and perfluorocarbon emissions — the numerator of the quota ledger. The cast-iron slag removal and pouring quality discussed here on 11 November, and the steel-beam weld build-up and online sorting of rod assemblies discussed on 14 November, are both essentially efforts to damp the variability of this chain. The two chains share the same stations but answer to two different accounting scopes, which is precisely why retrofit acceptance criteria need to be written explicitly.

4. Workshop-level items that can actually be audited

  • Sub-metering and certificate ledgers: register grid power, captive power, green-power transactions, green certificates and waste-heat recovery power separately; keep monthly information-based data filing consistent with the annual emissions report; calibrate measuring instruments on schedule and close three-tier metering gaps so facility boundaries are unambiguous.
  • Anode and anode-effect records: record anode consumption, the anode-effect coefficient and the frequency and duration of effects to specification, and export, sign off and archive cell-control system data on a fixed cycle. The gap most often cited in public discussion is exactly this: the data exist in the system but cannot be produced at verification.
  • Assembly quality traceability: keep iron-to-carbon voltage-drop sampling, cast-iron composition analysis, carbon-bowl cleaning and drying, claw shot blasting and straightening, rod straightening and sorting decisions traceable by batch, so that contact-resistance variation and abnormal anode consumption can be attributed separately.
  • Recompute boundaries after transfer: reconfirm facility boundaries, purchased-electricity treatment, historical baselines and benchmarks under the unified national sectoral guideline rather than carrying over local default values; plan ledger retention on a horizon of at least five years and keep it continuous across list entry and exit.

5. Scope notes

3,746 is a count of listed units and 100 a count of regulated aluminium smelting units; neither is capacity or output. The 26,000 tonnes of CO2 equivalent is an inclusion threshold, not total emissions. The 1.56 tCO2e per tonne of aluminium figure is a 2025 benchmark value, not a 2026 quota benchmark. The allocation scheme applies to 2026 while the list belongs to 2027; different years, not one table. Local list publications, accounting detail and surrender requirements should be checked against provincial ecology and environment authorities and official public information, since reprints may retain only the highlights.

This column is a compilation of public information and independent industry commentary, for reference only; it is not investment, procurement or engineering advice. The policies and data cited here are not the business, clients or track record of Beijing Brochot Metallurgical Technology & Trading Co., Ltd.

公开来源Public sources

来源信息以原发布方页面为准;本文仅作整理与解读,不代表任何招标人或发布方立场。Please refer to the original publisher for authoritative details. This article is an independent summary and does not represent any tenderer or publisher.